Produktai skirti gazolio tiekėjas (6)

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling SAE Grade:32 Viscosity, @ 100ºC, cSt (ASTM D445):7 Viscosity, @ 40ºC, cSt (ASTM D445):32

L'huile hydraulique ISO 46 est une huile hydraulique de qualité exceptionnelle, développée pour répondre aux exigences de fluides hydrauliques acceptables pour l'environnement. Ce produit est basé sur des esters synthétiques, facilement biodégradables. Un ensemble d'additifs haute performance soigneusement sélectionnés offre d'excellentes propriétés anti-usure et extrême-pression ainsi qu'une bonne stabilité thermique et une protection contre la corrosion. La résistance à l'oxydation intrinsèquement forte anticipe le gommage et l'accumulation de gouttes à des températures élevées. En raison du VI naturel élevé du fluide de base et du point d'écoulement bas, le comportement de la température de viscosité permet une plage de températures de fonctionnement très large. L'huile hydraulique 46 est recommandée en cas de perte accidentelle de fluide dans l'environnement ou lorsque la contamination de l'eau de surface doit être évitée. Les zones d'application couvrent les équipements SAE Grade:46 Viscosity, @ 100ºC, cSt (ASTM D445):9 Viscosity, @ 40ºC, cSt (ASTM D445):47

Performance Standard : API SN/ SM / SL SAE 0W20 API SN/ SM / SL is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. SAE 0W20 API SN/ SM / SL gasoline engine oil meets the requirements of various vehicle manufacturers and industry standards and outperforms conventional oils. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 0W20 API SN/ SM / SL gasoline engine oil is recommended by DANA Lubes for SAE 5W-20 and 0W-20 applications in all types of gasoline fueled passenger cars, SUV’s, vans, and light trucks. It is engineered to help deliver outstanding engine protection and fuel economy benefits. It is recommended for extreme cold conditions to help deliver quick starts and fast lubrication. It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the... SAE Grade:0W-20 Viscosity, @ 100ºC, cSt (ASTM D445):8.7 Viscosity, @ 40ºC, cSt (ASTM D445):44.8 Viscosity Index:173 Sulfated Ash, wt% (ASTM D874):0.8 HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683):2.7 Phosphorous (ASTM D4951):0.065 Flash Point, ºC (ASTM D92):224 Total Base Number (ASTM D2896):8.8 MRV @ -40ºC (ASTM D4684):9200 Density @15.6ºC g/ml (ASTM D4052):0.841

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,... Hydraulic Oil:32 Colour, ISO 2049:1.5 cSt @ 40ºC:32 Viscosity Index, ASTM D 2270:189 Pour Point, ºC, ASTM D 97:-39 Flash Point, ºC, ASTM D 92:248 Density @ 15 ºC kg/l, ASTM D 4052:911 FZG Scuffing, DIN 51534, A/8.3/90, Fail Stage:12

Base oil SN 600 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is generally used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : SN 600 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Norme de performance: API CJ4 / CI4 / CH4 SAE 20W50 API CJ4 / CI4 / CH4 est une huile pour moteur diesel haute performance qui fournit une protection moteur éprouvée aux moteurs diesel fonctionnant dans des applications de service sévères. L'huile pour moteur diesel SAE 20W50 est recommandée pour une utilisation dans une vaste gamme d'applications et d'environnements d'exploitation difficiles dans les secteurs du camionnage, de la construction et de l'agriculture. EVO E - Protection supplémentaire du moteur, de l'embrayage et des engrenages V - Rapport qualité / prix avec un kilométrage supplémentaire de 70% O - Performance exceptionnelle dans tous les temps SAE Grade:20W50 Viscosity, @ 100ºC, cSt (ASTM D445):17.6 Viscosity, @ 40ºC, cSt (ASTM D445):148.9